Find the battery-release latch and press down on it with one hand, and then pull the battery out of the case, setting the netbook battery aside.
The convenience provided by the portability of a norebook can
become a hindrance due to the screen malfunctions? it is absolutely not easy to
connect a new monitor as you can with a desktop structure. If the backlight
of the LCD screen has failed, you can see any sort of image. To fix the
problem, the entire inverter board and it is connected LCD cable must have
to be manually swapped. Here below are the instruction for a
reference.
1. Check within the manual of your laptop computer or search the infomation as a result of
the Internet to support the a natural part of the manufacturer抯 websites. Just
get that what brand fo inverter board you need for your computer, take
my Pavilion DV2000 Display as instance, I purchase a right one from an honest site, HooToo. com, and then i fix it without any help.
2. Turn off typically the laptop抯 operation system. Shut down the LCD screen
lid. CTurn the whole laptop over therefore the bottom end of the case is facing
up towards you. Locate the battery-release latch and press down on it
with one hand, and then pull the battery out of the case, setting the netbook battery aside.
3. Locate the rubber pieces about the edges and top of the LCD. Pop the
stopper pieces off of the case by inserting a flat object underneath
them and then pulling out toward most people. Use a screwdriver to take out the
screws hidden underneath the stoppers.
4. Put the laptop computer back over and open up the LCD screen support.
Slide a flat not to mention thin object, such being screwdriver, directly
underneath the seam from the plastic bezel underneath the actual LCD screen.
Wiggle the screwdriver up and down gently until the bezel pops there are various
case. Lift the bezel up and check to see if there is some sort of cable running to
the motherboard. Disconnect the cable if there is one.
5. Pull the case on the screen closer, and then remove them from
the laptop. Locate the inverter board at the bottom of the screen not to mention
find the cable running in the inverter board to that motherboard. Pull
off the strip of tape about the board and remove that screws holding it throughout
place if there are any in your particular model of laptop or pc. Disconnect
the cable from the motherboard.
6. Connect the actual motherboard cable for naff bezel and place the actual bezel
back onto typically the laptop case. Finally, just put the battery into the laptop
and power it again on, and then when the manufacturer抯 logo appear at the
screen, it mean that you are successfull to install the ultra-modern inverter
board and conductor rightly.
Article Tags:
Inverter Board
